Get your Wavlink devices setup with Wavlink Login Network

Wavlink Network is to setup and configure Wavlink devices. Our support extends to Wavlink Routers, Wifi Repeaters, WiFi Mesh Systems and Outdoor Extenders. We take you onboard to create your Wavlink login account for the specific device. We offer a vast library of DIY setup guides, installation instructions and ready to download user manual for Wavlink WiFi devices.

Learn how to setup Wavlink login account via IP address/URL, and troubleshoot common login issues for seamless performance and connectivity.

Wavlink Login: To Access and Manage WiFi Network

WiFi Wavlink Setup Portal is wifi.wavlink.com. This web interface is accessible only after you physically set up the Wavlink networking device; and after establishing connection between your computer and networking device. Enter wifi.wavlink.com into the search bar of the web browser; you will find a login page to fill in user credentials into respective fields. Read the detailed instructions provided below:

A Wavlink login via IP Address

IP Address to configure Wavlink Wifi Devices is 192.168.10.1. Follow below steps to easily login to the Wavlink’s web interface.

  • Connect your router with the device either wirelessly or with the ethernet cable provided.
    wavlink login via ip address
  • Open a web browser (Google, Safari or Firefox, etc.) on your system.
  • Type the IP address: 192. 168.10.1 in the search bar of the browser and tap Enter.
  • You’ll reach a login dashboard that requires username & password. The default username and password is usually “admin” unless changed by you.
    wavlink login
  • After the credentials have been filled, tap Enter to access the router’s settings.

Note: Make sure IP address is correct (192.168.10.1, not 192.168.l0.1, which is incorrect).

B Wavlink login via URL wifi.wavlink.com

You can use the URL: wifi.wavlink.com in place of the IP address. Proceed with these steps:

  • Open the internet browser. (Google, Firefox or Safari)
  • Enter the Wavlink router’s web URL in the address bar of the browser: http://wifi.wavlink.com
  • Enter the credentials provided, i-e username and password.
    wavlink login via url
  • Once the necessary credentials have been entered, press Enter to access the administrative interface.
  • Now, control the settings of your device using the admin panel of web interface.

Troubleshooting Wavlink setup Login Issues

A Unable to Reach the Login Page

If you can’t reach the login page, attempt below steps:

  • Verify your device’s connection: Make sure your device is connected to the router’s network, using either Wi-Fi or Ethernet.
  • Verify the IP address or URL is accurate: Recheck the IP or URL you entered into the address bar.
  • Clear Cache: Empty your browser cache or use a different browser to fix any issue related to the browser.

wavlink troubleshooting

B Wrong Username/Password

If you’re experiencing difficulties to login into wifi.wavlink.com setup interface because of incorrect details. Try below steps:

  • Use Default Credentials: Typically, the default username and password are admin/admin. Refer to your router’s label or manual for accurate information.
  • If you’ve forgotten the login details, reset the router: Hold down the reset button for 10-15 seconds to revert the router to its original settings.

C Router Not Responding

If the router does not respond. Resolve the issue following below steps:

  • Reboot the router: Disconnect the router, wait for 10-15 seconds, then reconnect it.
  • Verify firmware updates: Make sure your router’s firmware is an updated one.
  • Check for hardware problems: Ensure that your router is operating correctly and not in recovery mode.

D Login Page Failing to Load

In case the login page fails to load; check the below checklist:

  • Inspect for network problems: Make sure there are no additional issues with the router, such as a reset or connectivity trouble.
  • Utilize an alternate device: Attempt to reach the login page from a different device to eliminate device-related issues.

Please note that protecting your Wavlink setup login credentials is of utmost importance. It ensures that your network is safe and secure.

Make sure you change the default username and password that you’ve used during the installation. Don’t forget to update your router’s firmware to maintain peak performance and security.

In any case, if you find yourself stuck and feel like you need further assistance, feel free to reach out to us. We, at Wavlink Network, are here to save your time and effort for the installation of the Wavlink setup. Get in touch now at support@ wifi-wavlink.net .

Frequently Asked Questions (FAQs)

What is the standard IP address to configure Wavlink router login account?

The standard IP address is usually 192.168.10.1; however, you can refer to the router’s label or manual for more specific and detailed information.

What steps should I take if I can’t remember the Wavlink router password?

Restore the router to its original settings, press and maintain the reset button for 10-15 seconds. This will reset the username and password to their defaults.

Is it possible for me to access my Wavlink router remotely?

Yes, it is possible to access your Wavlink router remotely, but you need to activate the remote management option in the router settings first.

How can I alter the login details for my Wavlink setup?

Once logged in, go to the Administration or Security options, where you can change the router’s username and password.

What is the process to update the firmware on a Wavlink router?

In the admin panel, find the firmware section and adhere to the on-screen prompts to verify and install any updates, if available.